Acoustic Mount Clip For Wall Vibration Sound Reduction Panel Wall Clip

Acoustic mount clip is a kind of panel wall clip that helps to reduce vibration and noise. The acoustic clip is usually used together with U shape steel or iron profile. The acoustic wall panel clips are developed to solve the drawbacks of traditional resilient clips.

Always available, our unique acoustic mount clips are essential in home theater design, and it is necessary to isolate walls and ceilings from existing structures. We first isolate the drywall and ceiling from the structure when connected to steel or wooden studs. The elastic sound clip is an isolated mount that can be mounted directly to the ceiling or wall frame. In addition to the elastic sound clips on the ceiling, the ceiling spring hanger system is the perfect answer for anyone who wants to eliminate any type of noise on the floor.

The resilient clips then have furring hat channel attached via pressure fit and layers of drywall fasten to the channel. Decoupling is the most effective way to isolate sound on all other methods, including damping, mass and absorption products. These isolation panel wall clips are used for vibration control of structural noise and help to build components that more effectively block airborne noise transmission.

Acoustic Mount Clip Specifications

Size: 10x26x28mm
Thickness: 2mm
Required: 4 pcs/3000mm

Acoustic Mounting Clip Advantages

High performance, low cost, use of soundproof clips to save labor;
Flexible “snap” clip for quick installation and height adjustment when installing channels;
Install standard drywall trenches without errors. Eliminate common accidental short circuits in elastic channels;
The simplest STC 55+ stud wall assembly method with acoustic clip;
Easily accommodates 60-70mm sink channel width.

On the walls, the resilient channels were held in place by isolation clips. Check here for alternative method wall vibration isolator.

The sound isolation clips are very simple to install and require two screws each. The wall panel clips can be spaced up to 1200mm apart and are spaced 600mm apart from each other. The top row should be up to 150mm from the center of the ceiling channel. The perimeter tape around the ceiling provides good elastic decoupling around the ceiling. And the bottom row is 75mm from the ground to the center of the channel. The noise-controlled elastic wall strip will provide elastic support and maximize sound control, and the elastic wall strips should be mounted on resiliently supported plasterboard.