Grooved Panels Acoustic Systems Absorbing Material Acoustic Pannel Room

Grooved MDF Panel Acoustic Systems Specifications

1. Structure: base material, surface treatment
2. Basic material: E1 MDF
3. Front Finish: melamine wood grain 100 colors
4. Back Finish: black acoustic fleece
5. Standard size: 2440 * 128, 2440 * 192 mm and so on
6. Standard thickness: 15 / 12 / 18mm
7. Standard Patterns: 13-3, 14-2
8.Installation:1) Light steel keel system (2) wood batten system
9. Fire rate: Can meet the Chinese standard B1 and BS476 Part 7 Class 1
10. Eco level: Guangzhou acoustic grooved panels can meet the EU and EU E1 standards
11. Applications: Gymnasiums, hotels, exhibition centers, schools, studios and so on.
12: Customization: Can be customized

Wooden Grooved Acoustic Panel Applications:

It’s used as acoustic grooved board in theater, concert hall, gymnasium, piano room, school, entertainment, hotel, KTV, factory, senior villa or family life, and acoustics, theater, studio, studio, studio, concert hall, conference hall, concert hall, and so on.

Installation method

Pre-installation preparation and installation requirements:

* The installation site must be dry and the minimum temperature should not be less than 10 degrees Celsius.
* The maximum humidity change after installation should be controlled in the range of 40% -60%.
* The installation site must meet the above specified humidity standards at least 24 hours prior to installation.
* Sound-absorbing board must be placed at the installation site for 48 hours, so that the sound-absorbing board to adapt to the indoor environment and fixed.
* Acoustic emission grooved panels must be installed according to the design drawings. Sound-absorbing panels must be arranged to accommodate 300-600mm pitch.
* If wood batten is use as keel, the distance between two battens is generally 500mm.

2. Wooden sound absorbing grooved panels are fixed by special light steel keel

* Fixed acoustic room absorbing material with the keel and screws
* Insert the fastener H02, H03 with the keel. The distance between the fasteners should allow the sound absorbing plate to be fixed.
* Installation sequence should be in accordance with the principle from left to right, from top to bottom.
* If you need to adjust the position of the acoustic panel, you only need to adjust the clip H02, H03.